Accessories

Inserts, Anchor In-Line

ANC-Ix
!
Larger picture

Replacement in-line inserts that will fit all popular in-line carp weights. The front section holds a #8 swivel securely. allowing it to release at the right moment. The rear section can be trimmed to fit the weights properly. 10 per pack.

Small (IS) is 38mm (1.5"), medium (IM) is 46mm (1.75") and the large (IL) is 62mm (2.5").

Combi Lead Converters
FX-AC2455
!
Close out! 25% off regular price. Limited quantities.
Injection moulded shafts convert all patterns of Fox In-line leads into conventional swivel bombs!

Captive Back Lead Bar 4-rod
FXCRP005
!
Developed for use with the Quattro Pod and the X Pod Plus, the Captive Back Lead Bar attaches between the front two banksticks providing fourclips for attaching your Captive Back Leads to. The innovative design of the back Lead incorporates a mechanical gate rather than those fiddly clips that depend on obtaining ‘just the right amount of tension to release smoothly’ without falling off when being fitted! Supplied with a fluorescent yellow cord, which serves to ‘stand out’ in the margins, reducing the chance of fish bumping into it and minimizing false line bites caused by fish close in! Wound on a purpose designed winder which allows perfect storage and reduces tangles during transit, the length of the cord can be adjusted depending on the depth of water you find beneath your rod tips and being highly visible will help to. 4 rod bars available.

Captive Back Lead Bar
 
FXRP3261
!
Larger picture
25% OFF!
Designed for the Quattro pod but can also be used with the X-Pod Plus. This unit clips onto the front two legs. The bar has three split rings at fixed intervals along it, each featuring a stainless steel clip to allow the winder from the 'Captive Back Lead' system to be attached.

Camo Coating Powder, Gardner
GARCCP-x
!
gardner_texturedcamo_coating_powder

The easy way to customise your own camo leads (and non-toxic weights). Creates a rock hard and durable, sand-textured matt coating for ultimate camouflage!

  • 4 colours available: Green, Brown, Sand, Black/Silt or make your own unique colours by mixing any combination.
  • Rock hard (when applied correctly) - the coating will not crumble off or decay in any way.
  • Contains approx 100g (enough to coat dozens of leads).

Directions for Use:

  1. Using a pair of pliers, heat the lead over a flame (eg. gas cooker) until hot enough for powder to melt onto it.
  2. Sprinkle a generous amount of the powder onto the lead until it is evenly covered.
  3. Bake in a preheated oven at 200ºC for a minimum of 10 minutes to cure the coating.
  4. Remove lead from oven using pliers and plunge into water to cool and harden the coating.

Spare O-Rings for BDS x 8
OR
!
Larger picture
Exact replacement (metric) O-rings for the Anchor Bait Delivery System leads. Probably cheaper than your local hardware store or home center.

Sleeves, Soft Plastic Lead Inserts x 5
RB9999
!
Larger picture

These have a number of uses in devising rigs, especially if you make your own leads. Made to fit in in-line leads, the fat end is big enough to jam a swivel into.