Buzz Bars, Rod Rests & Accessories
!

Buzz Bar, Aluminum Telescopic X2

AV007
!
Made of durable lightweight aluminum.  Includes the rod lock system.  Telescopic side arms with flattened edges to insure level each time.  Will accommodate 3 bite alarms or rod rests.  Extends to 19".

Buzz bars, Rod-Lok pair 3-Rod

BB9056
!
‘Goal post’ style 3 rod bar for ultimate stability.

Quick Release for Alarms and Rod Rests

BH-BBADxx
!

Quick Release BB Adaptor (upper left in picture) screws into into your buzz bar or bankstick and locks down tight with the knurled nut. The Quick Release Top Cup (top left and included in the Adapter) screws onto the bite alarm or rod rest. The large screw(included in the adapter) or the T-Lock Screw (lower lower) locks the Cup into the Adapter.

A quick quarter turn or so of the screw releases the Cup and a quick turn of the Cup removes it from the buzz bar or bankstick.

Bankstick, Deluxe, Heavy Duty, Quick Release

BH-BSQR-xx
!
Larger picture 

These are very nice banksticks/storm poles. Beefy, inside and out. The outer diameter is 3/4" and the inner post is nearly 5/8". Locking mechanism for the height is a T-Lock screw bearing against curved plate. Positive locking without marring the inner post. Stepped point makes it easy to stick into the ground.

Quick Release Top Cup screws onto your buzzer or rod rest and stays attached. A quarter turn or less of the T-Lock Screw releases the Top Cup and a quarter turn removes it. Additional Quick Release Top Cups and T-Lock Screws are available so you can have all of your alarms and rod rests set-up for quick attachment and removal.

 

Rod Rest, Enterprise Luminous Front

ET42
!
Larger picture 
This Specialist Rod Rest has an illuminated head for any night fishing situation.

There are 4 powerful re-chargeable luminous glowsticks that illuminate the clear head to assist rod placement at night. Glow sticks can be replaced if desired with 2 high power isotopes using the silicone tube provided.

The unique design of the Specialist Rod Rests allows a sideways strike and prevents the rod from being dragged in.

Butt Rest, Enterprise Luminous

ET44
!
Larger picture 

Our Butt Gripper rear rest has been designed to assist rod placement and location at night, and give a secure grip on either duplon, cork or rod blanks. Clear with rechargeable luminous inserts, glow for 3-4 hours before needing a recharge.

Buzz Bars, 3 Rod Fixed/Goal Post (pr)

FXBB3311
!
There are very few of us who could honestly say that we don't take too much tackle and these buzz bars have been specifically developed to try to reduce the amount needed. By simply removing the two caps at either end of the bars and inserting the four screws provided, the standard 3 rod set-up is converted quickly to a "Goal Posts" allowing anglers to choose between standard buzzer bar and goal post set-ups at half the weight and cost.

Rod-Lok

FXBB7086
!
A unique back rest which grips the rod tightly and yet releases easily when the angler picks it up.

Buzz Bars, Euro pair

FX-BB7668
!
Constructed from 15mm diameter tubing with extendible ‘D’ shaped arms, to help prevent twist. Fitted with 3/8” BSF brass inserts.

Sky Pod Butt Caps

FXRP3576
!
Larger picture 
Cup style butt rests that is very useful for holding rods in a near vertical position.

Sky Pod Buzz Bars

FXRPxxxx
!

Increase the versatilty of your Sky Pod by adding 2-, 3- or 4-rod buzz bars. Sold by the pair, one for the front and one for the rear.

FXRP5303 2-rod
FXRP3574 3-rod
FXRP3575 4-rod

Connector, ProLogic Quick Release 3x

PRO99001/2
!
Larger picture 

Prologic Quick Release Connectors will do more for angling than cats eyes did for motoring! No more screwing rod rests, keepnets and baitwaiters onto banksticks and buzz bars, alarms onto pods and landing nets onto handles. Simply clip them on and off in a flash. Will not twist or turn and will reduce your setting up time massively with literally hundreds of uses.

- Ball bearing locking system
- Instant pull back release
- Precision cut aluminium
- Incredibly strong
- Very secure

3 sets per pack.

Available in three sizes:
PRO99002 Small
PRO99001 Medium 

Patent pending

Tripod, Telescopic

RB3802
!
Larger picture 

Lightweight tripod with extendible certer post and legs. Threaded for buzzers or butt rests. Legs can be removed and used as banksticks (11" - 17") as can the center post (14" - 21").

Height adjustable from 14" to 33".

Buzz Bars, 3-Rod Square

RB3849
!
Larger picture 

Durable 3/8" x 3/8" square bar 20" long with center stud for a bankstick. tripod or rod pod. Three olders for rod rests or alarms; one centered and two that can be positioned anywhere on the bar. Sold individually.

RB3849

 

Adjusti Nut x5

RB3880
!
Brass nut to fit studs on buzzers and butt rests. Makes it easier to lock the buzzers and rests in place.

Rod Rest U Hvy Duty Brass Thrd

RB3893
!
Larger picture 
Durable rod rest, virtually unbreakable plastic "U" with brass threads. "U" rest holds the butt of the rod.

Rod Rest Y Hvy Duty Brass Thrd

RB3894
!
Durable rod rest, virtually unbreakable plastic "V" with brass threads. "V" rest holds the front of the rod and has a slot for the line to pass through.

Butt Grip Hvy Duty

RB3897
!
rb3897
Heavy duty butt grip with brass threads. A great value.

Butt Grip Soft

RB3898
!
Larger picture 
A solid butt grip with a brass stud and soft plastic grip. Holds the rod firmly but releases readily when you grab the rod.

Butt Grip, Soft Dual

RB390306
!
Larger picture 
Soft butt grip with two positions to grip rods. Bress threaded stud.